A blog largely about photos I've taken over some years of classic and historic racing and sports cars.
Saturday, 31 July 2021
1934 ERA R3A
Friday, 30 July 2021
Friday's Ferrari
Thursday, 29 July 2021
1933 Napier Railton
Wednesday, 28 July 2021
Three Aeroplanes
Tuesday, 27 July 2021
1914 Willys-Overland Model 79 Speedster
Monday, 26 July 2021
1931 Invicta Low Chassis S-Type
Sunday, 25 July 2021
Innes Ireland
Saturday, 24 July 2021
1961 Aston Martin DB4 Bertone Jet
Friday, 23 July 2021
Friday's Ferrari
Thursday, 22 July 2021
NG Road Racing Oulton Park 2017
Wednesday, 21 July 2021
1965 Porsche 904 GTS
Tuesday, 20 July 2021
2005 Daihatsu Copen
Monday, 19 July 2021
Robey Traction Engine
Sunday, 18 July 2021
1989 MG 6R4
Saturday, 17 July 2021
1957 Cooper T41
Friday, 16 July 2021
Friday's Ferrari
Thursday, 15 July 2021
1948 Simca-Gordini
Wednesday, 14 July 2021
1913 Scout Torpedo
Tuesday, 13 July 2021
1967 Lola T70 Aston Martin
Monday, 12 July 2021
1902 Haynes Apperson
Sunday, 11 July 2021
1965 Ford Falcon Sprint
Saturday, 10 July 2021
1931 MG C-Type Montlhery
Friday, 9 July 2021
Friday's Ferrari
Thursday, 8 July 2021
1938 Delage Special
Wednesday, 7 July 2021
1987 TVR 390SE
Tuesday, 6 July 2021
1957 Jaguar D-Type
Monday, 5 July 2021
1969 McLaren M15 Indianapolis
The car was designed by Gordon
Coppuck in 1969 after McLaren had decided to build a car for the 1970
Indianapolis 500.
Using their experience of
building and running Can-Am cars a single seater was designed as a light alloy
stressed and riveted monocoque with bulged sides, to accommodate the fuel tanks,
and the bodywork was GRP.
Suspension layout was
conventional using upper and lower wishbones, twin radius rods and anti-roll bar
to the rear. The outboard coil-over dampers could be hardened or softened
independently on either side by the driver during the race, to optimise handling
on the steeply banked Indy circuit. Braking was by outboard ventilated discs
all round with A.P. four pot calipers.
The engine was based upon the
dominant, Garrett turbocharged 2.65 litre 4 cylinder Meyer-Drake unit
developing 750 bhp at 9,000 rpm and driving through a McLaren-Hewland LG500
4-speed gearbox.
Two prototypes were ready by
the qualifying deadline and the drivers were to be Denny Hulme and Chris Amon. It
emerged that Chris Amon was unable to adapt to the special driving technique
required for the Indy circuit and Denny Hulme was injured in a freak accident,
where, due to a faulty fuel filler seal, fuel was drawn out of the tank by the
airflow and ignited by the red hot turbo charger casing.'